Our Services

Inspector app

Inspector is a web application hosted on our cloud. It is used to easily navigate through photos taken during inspections

hanks to the simplified model and easy operation, the user can browse the inspection images in a completely new way, either by clicking on the photo to show the position of the camera and the place on the model that it captures, or the other way around, i.e. the user selects the place on the model that interests him and the application displays all the photos that capture the selected place.

Another benefit is the ability to color the model. Each photo can be color coded by the user according to the state of the structure it captures. This colours the entire model, making critical areas visible in a wider context, such as material fatigue and frequent unilateral stresses on the structure.

Photographs can also be captioned and measurements can be taken. The measurement tool can detect the tilt and ruggedness of the object in the photograph and provide accurate pseudo3D measurements.

In case of regular scanning and proper user control, it is then possible to monitor the condition of the structure over time. It is then easy to see the progress of the degradation of the structure on the painted model.

Drones in use

DJI Matrice 210 D-RTK V1 & V2

These are very versatile machines. We use them for inspections, for interventions with IZS (Integrated Rescue System) units but also for shooting cinematographic pieces.

More info

Carried equipment

DJI Zenmuse X7

A camera for filmmaking on the DJI Inspire 2 UAV. It features a Super 35 sensor with 24 MP CMOS capabilities that allows you to record up to 6K/30 fps RAW images simultaneously with a dynamic range of 14 aperture numbers. We use this camera specifically for filmmaking or to scan objects in detail and then convert them into a 3D model.

More info

Elistair LIGH-T 4

Each UAV has a flight time limit. For some machines it is up to 20 minutes, for others it can fly for almost an hour. However, in the case of monitoring a fire and its spread, it is important to have an overview of the whole situation at all times. For this reason, we have purchased the Elistair LIGH-T 4 for the needs of the IZS (Integrated Rescue System). This is a docking station for the UAV, to which the entire station is connected by cable. The maximum length of the cable(weight 10.5 g/m) and also the maximum flight height is 70m. The power supply then runs from the power supply, via Elistair over the cable to the battery module in the UAV.

More info

GL60 Spotlight

LED spotlight to assist the IZS (Integrated Rescue System). This is the most commonly used payload at events in the dark. It was created as a replacement for the DJI Z15 Spotlight we have used so far. It now has the ability to adjust its focal length during flight. This allows us to direct the intensity of the light much more precisely on the object of interest. It is fully compatible with the DJI Matrice 210 and DJI Matrice 300.

More info

DJI Zenmuse XT2

A total of 2 different sensors on one carrier. This is the DJI Zenmuse XT2 camera. It can see in both the RGB spectrum and the IR spectrum. The stability of these two cameras is then provided by a 3-axis gimball. Previously it was necessary to use 2 different cameras to fully equip the DJI Matrice 210, now we can use any one more camera to this camera.

More info

DJI Zenmuse Z30

The first DJI camera with optical ZOOM. An indispensable tool for inspection photography. If we can't get right up close to the inspection object, we can at least zoom in to see the detail in high resolution.

More info

Every new contract for us always has the same and only goal - success and a maximally satisfied client.